Home · All Classes · Main Classes · Grouped Classes · Modules · Functions

QRegExp Class Reference
^{[QtCore module]}

The QRegExp class provides pattern matching using regular expressions. More...

#include <QRegExp>

Note: All the functions in this class are reentrant.

• List of all members, including inherited members
• Qt 3 support members

Public Types

• enum CaretMode { CaretAtZero, CaretAtOffset, CaretWontMatch }
• enum PatternSyntax { RegExp, Wildcard, FixedString }

Public Functions

• QRegExp ()
• QRegExp ( const QString & pattern, Qt::CaseSensitivity cs = Qt::CaseSensitive, PatternSyntax syntax = RegExp )
• QRegExp ( const QRegExp & rx )
• ~QRegExp ()
• QString cap ( int nth = 0 )
• QStringList capturedTexts ()
• Qt::CaseSensitivity caseSensitivity () const
• QString errorString ()
• bool exactMatch ( const QString & str ) const
• int indexIn ( const QString & str, int offset = 0, CaretMode caretMode = CaretAtZero ) const
• bool isEmpty () const
• bool isMinimal () const
• bool isValid () const
• int lastIndexIn ( const QString & str, int offset = -1, CaretMode caretMode = CaretAtZero ) const
• int matchedLength () const
• int numCaptures () const
• QString pattern () const
• PatternSyntax patternSyntax () const
• int pos ( int nth = 0 )
• void setCaseSensitivity ( Qt::CaseSensitivity cs )
• void setMinimal ( bool minimal )
• void setPattern ( const QString & pattern )
• void setPatternSyntax ( PatternSyntax syntax )
• bool operator!= ( const QRegExp & rx ) const
• QRegExp & operator= ( const QRegExp & rx )
• bool operator== ( const QRegExp & rx ) const

Static Public Members

• QString escape ( const QString & str )

Related Non-Members

• QDataStream & operator<< ( QDataStream & out, const QRegExp & regExp )
• QDataStream & operator>> ( QDataStream & in, QRegExp & regExp )

Detailed Description

The QRegExp class provides pattern matching using regular expressions.

Regular expressions, or "regexps", provide a way to find patterns within text. This is useful in many contexts, for example:

We present a very brief introduction to regexps, a description of Qt's regexp language, some code examples, and finally the function documentation itself. QRegExp is modeled on Perl's regexp language, and also fully supports Unicode. QRegExp can also be used in the weaker wildcard, mode which works in a similar way to command shells. It can even be feed with fixed strings (see setPatternSyntax()). A good text on regexps is Mastering Regular Expressions: Powerful Techniques for Perl and Other Tools by Jeffrey E. Friedl, ISBN 1565922573.

Experienced regexp users may prefer to skip the introduction and go directly to the relevant information.

• Introduction
• Characters and Abbreviations for Sets of Characters
• Sets of Characters
• Quantifiers
• Capturing Text
• Assertions
• Wildcard Matching
• Notes for Perl Users
• Code Examples

Introduction

Regexps are built up from expressions, quantifiers, and assertions. The simplest form of expression is simply a character, e.g. x or 5. An expression can also be a set of characters. For example, [ABCD], will match an A or a B or a C or a D. As a shorthand we could write this as [A-D]. If we want to match any of the captital letters in the English alphabet we can write [A-Z]. A quantifier tells the regexp engine how many occurrences of the expression we want, e.g. x{1,1} means match an x which occurs at least once and at most once. We'll look at assertions and more complex expressions later.

Note that in general regexps cannot be used to check for balanced brackets or tags. For example if you want to match an opening html <b> and its closing <b>, you can only use a regexp if you know that these tags are not nested; the html fragment, <b>bold <b>bolder</b></b> will not match as expected. If you know the maximum level of nesting it is possible to create a regexp that will match correctly, but for an unknown level of nesting, regexps will fail.

We'll start by writing a regexp to match integers in the range 0 to 99. We will require at least one digit so we will start with [0-9]{1,1} which means match a digit exactly once. This regexp alone will match integers in the range 0 to 9. To match one or two digits we can increase the maximum number of occurrences so the regexp becomes [0-9]{1,2} meaning match a digit at least once and at most twice. However, this regexp as it stands will not match correctly. This regexp will match one or two digits within a string. To ensure that we match against the whole string we must use the anchor assertions. We need ^ (caret) which when it is the first character in the regexp means that the regexp must match from the beginning of the string. And we also need $ (dollar) which when it is the last character in the regexp means that the regexp must match until the end of the string. So now our regexp is ^[0-9]{1,2}$. Note that assertions, such as ^ and $, do not match any characters.

If you've seen regexps elsewhere, they may have looked different from the ones above. This is because some sets of characters and some quantifiers are so common that they have special symbols to represent them. [0-9] can be replaced with the symbol \d. The quantifier to match exactly one occurrence, {1,1}, can be replaced with the expression itself. This means that x{1,1} is exactly the same as x alone. So our 0 to 99 matcher could be written ^\d{1,2}$. Another way of writing it would be ^\d\d{0,1}$, i.e. from the start of the string match a digit followed by zero or one digits. In practice most people would write it ^\d\d?$. The ? is a shorthand for the quantifier {0,1}, i.e. a minimum of no occurrences a maximum of one occurrence. This is used to make an expression optional. The regexp ^\d\d?$ means "from the beginning of the string match one digit followed by zero or one digits and then the end of the string".

Our second example is matching the words 'mail', 'letter' or 'correspondence' but without matching 'email', 'mailman', 'mailer', 'letterbox' etc. We'll start by just matching 'mail'. In full the regexp is, m{1,1}a{1,1}i{1,1}l{1,1}, but since each expression itself is automatically quantified by {1,1} we can simply write this as mail; an 'm' followed by an 'a' followed by an 'i' followed by an 'l'. The symbol '|' (bar) is used for alternation, so our regexp now becomes mail|letter|correspondence which means match 'mail' or 'letter' or 'correspondence'. Whilst this regexp will find the words we want it will also find words we don't want such as 'email'. We will start by putting our regexp in parentheses, (mail|letter|correspondence). Parentheses have two effects, firstly they group expressions together and secondly they identify parts of the regexp that we wish to capture. Our regexp still matches any of the three words but now they are grouped together as a unit. This is useful for building up more complex regexps. It is also useful because it allows us to examine which of the words actually matched. We need to use another assertion, this time \b "word boundary": \b(mail|letter|correspondence)\b. This regexp means "match a word boundary followed by the expression in parentheses followed by another word boundary". The \b assertion matches at a position in the regexp not a character in the regexp. A word boundary is any non-word character such as a space a newline or the beginning or end of the string.

For our third example we want to replace ampersands with the HTML entity '&amp;'. The regexp to match is simple: &, i.e. match one ampersand. Unfortunately this will mess up our text if some of the ampersands have already been turned into HTML entities. So what we really want to say is replace an ampersand providing it is not followed by 'amp;'. For this we need the negative lookahead assertion and our regexp becomes: &(?!amp;). The negative lookahead assertion is introduced with '(?!' and finishes at the ')'. It means that the text it contains, 'amp;' in our example, must not follow the expression that preceeds it.

Regexps provide a rich language that can be used in a variety of ways. For example suppose we want to count all the occurrences of 'Eric' and 'Eirik' in a string. Two valid regexps to match these are \b(Eric|Eirik)\b and \bEi?ri[ck]\b. We need the word boundary '\b' so we don't get 'Ericsson' etc. The second regexp actually matches more than we want, 'Eric', 'Erik', 'Eiric' and 'Eirik'.

We will implement some the examples above in the code examples section.

Characters and Abbreviations for Sets of Characters

Note: The C++ compiler transforms backslashes in strings, so to include a \ in a regexp, you will need to enter it twice, i.e. \\. To match the backslash character itself, you will need four: \\\\.

Sets of Characters

Square brackets are used to match any character in the set of characters contained within the square brackets. All the character set abbreviations described above can be used within square brackets. Apart from the character set abbreviations and the following two exceptions no characters have special meanings in square brackets.

Using the predefined character set abbreviations is more portable than using character ranges across platforms and languages. For example, [0-9] matches a digit in Western alphabets but \d matches a digit in any alphabet.

Note that in most regexp literature sets of characters are called "character classes".

Quantifiers

By default an expression is automatically quantified by {1,1}, i.e. it should occur exactly once. In the following list E stands for any expression. An expression is a character or an abbreviation for a set of characters or a set of characters in square brackets or any parenthesised expression.

If we wish to apply a quantifier to more than just the preceding character we can use parentheses to group characters together in an expression. For example, tag+ matches a 't' followed by an 'a' followed by at least one 'g', whereas (tag)+ matches at least one occurrence of 'tag'.

Note that quantifiers are "greedy". They will match as much text as they can. For example, 0+ will match as many zeros as it can from the first zero it finds, e.g. '2.0005'. Quantifiers can be made non-greedy, see setMinimal().

Capturing Text

Parentheses allow us to group elements together so that we can quantify and capture them. For example if we have the expression mail|letter|correspondence that matches a string we know that one of the words matched but not which one. Using parentheses allows us to "capture" whatever is matched within their bounds, so if we used (mail|letter|correspondence) and matched this regexp against the string "I sent you some email" we can use the cap() or capturedTexts() functions to extract the matched characters, in this case 'mail'.

We can use captured text within the regexp itself. To refer to the captured text we use backreferences which are indexed from 1, the same as for cap(). For example we could search for duplicate words in a string using \b(\w+)\W+\1\b which means match a word boundary followed by one or more word characters followed by one or more non-word characters followed by the same text as the first parenthesised expression followed by a word boundary.

If we want to use parentheses purely for grouping and not for capturing we can use the non-capturing syntax, e.g. (?:green|blue). Non-capturing parentheses begin '(?:' and end ')'. In this example we match either 'green' or 'blue' but we do not capture the match so we only know whether or not we matched but not which color we actually found. Using non-capturing parentheses is more efficient than using capturing parentheses since the regexp engine has to do less book-keeping.

Both capturing and non-capturing parentheses may be nested.

When the number of matches cannot be determined in advance, a common idiom is to use cap() in a loop. For example:

    QRegExp rx("(\\d+)");
    QString str = "Offsets: 12 14 99 231 7";
    QStringList list;
    int pos = 0;

    while ((pos = rx.indexIn(str, pos)) != -1) {
        list << rx.cap(1);
        pos += rx.matchedLength();
    }
    // list: ["12", "14", "99", "231", "7"]

Assertions

Assertions make some statement about the text at the point where they occur in the regexp but they do not match any characters. In the following list E stands for any expression.

Wildcard Matching

Most command shells such as bash or cmd.exe support "file globbing", the ability to identify a group of files by using wildcards. The setPatternSyntax() function is used to switch between regexp and wildcard mode. Wildcard matching is much simpler than full regexps and has only four features:

For example if we are in wildcard mode and have strings which contain filenames we could identify HTML files with *.html. This will match zero or more characters followed by a dot followed by 'h', 't', 'm' and 'l'.

To test a string against a wildcard expression, use exactMatch(). For example:

    QRegExp rx("*.txt");
    rx.setPatternSyntax(QRegExp::Wildcard);
    rx.exactMatch("README.txt");        // returns true
    rx.exactMatch("welcome.txt.bak");   // returns false

Notes for Perl Users

Most of the character class abbreviations supported by Perl are supported by QRegExp, see characters and abbreviations for sets of characters.

In QRegExp, apart from within character classes, ^ always signifies the start of the string, so carets must always be escaped unless used for that purpose. In Perl the meaning of caret varies automagically depending on where it occurs so escaping it is rarely necessary. The same applies to $ which in QRegExp always signifies the end of the string.

QRegExp's quantifiers are the same as Perl's greedy quantifiers. Non-greedy matching cannot be applied to individual quantifiers, but can be applied to all the quantifiers in the pattern. For example, to match the Perl regexp ro+?m requires:

    QRegExp rx("ro+m");
    rx.setMinimal(true);

The equivalent of Perl's /i option is setCaseSensitivity(Qt::CaseInsensitive).

Perl's /g option can be emulated using a loop.

In QRegExp . matches any character, therefore all QRegExp regexps have the equivalent of Perl's /s option. QRegExp does not have an equivalent to Perl's /m option, but this can be emulated in various ways for example by splitting the input into lines or by looping with a regexp that searches for newlines.

Because QRegExp is string oriented there are no \A, \Z, or \z assertions. The \G assertion is not supported but can be emulated in a loop.

Perl's $& is cap(0) or capturedTexts()[0]. There are no QRegExp equivalents for $`, $' or $+. Perl's capturing variables, $1, $2, ... correspond to cap(1) or capturedTexts()[1], cap(2) or capturedTexts()[2], etc.

To substitute a pattern use QString::replace().

Perl's extended /x syntax is not supported, nor are directives, e.g. (?i), or regexp comments, e.g. (?#comment). On the other hand, C++'s rules for literal strings can be used to achieve the same:

    QRegExp mark("\\b"      // word boundary
                  "[Mm]ark" // the word we want to match
                );

Both zero-width positive and zero-width negative lookahead assertions (?=pattern) and (?!pattern) are supported with the same syntax as Perl. Perl's lookbehind assertions, "independent" subexpressions and conditional expressions are not supported.

Non-capturing parentheses are also supported, with the same (?:pattern) syntax.

See QString::split() and QStringList::join() for equivalents to Perl's split and join functions.

Note: because C++ transforms \'s they must be written twice in code, e.g. \b must be written \\b.

Code Examples

    QRegExp rx("^\\d\\d?$");    // match integers 0 to 99
    rx.indexIn("123");          // returns -1 (no match)
    rx.indexIn("-6");           // returns -1 (no match)
    rx.indexIn("6");            // returns 0 (matched as position 0)

The third string matches '6'. This is a simple validation regexp for integers in the range 0 to 99.

    QRegExp rx("^\\S+$");       // match strings without whitespace
    rx.indexIn("Hello world");  // returns -1 (no match)
    rx.indexIn("This_is-OK");   // returns 0 (matched at position 0)

The second string matches 'This_is-OK'. We've used the character set abbreviation '\S' (non-whitespace) and the anchors to match strings which contain no whitespace.

In the following example we match strings containing 'mail' or 'letter' or 'correspondence' but only match whole words i.e. not 'email'

    QRegExp rx("\\b(mail|letter|correspondence)\\b");
    rx.indexIn("I sent you an email");     // returns -1 (no match)
    rx.indexIn("Please write the letter"); // returns 17

The second string matches "Please write the letter". The word 'letter' is also captured (because of the parentheses). We can see what text we've captured like this:

    QString captured = rx.cap(1); // captured == "letter"

This will capture the text from the first set of capturing parentheses (counting capturing left parentheses from left to right). The parentheses are counted from 1 since cap(0) is the whole matched regexp (equivalent to '&' in most regexp engines).

    QRegExp rx("&(?!amp;)");      // match ampersands but not &
    QString line1 = "This & that";
    line1.replace(rx, "&");
    // line1 == "This & that"
    QString line2 = "His & hers & theirs";
    line2.replace(rx, "&");
    // line2 == "His & hers & theirs"

Here we've passed the QRegExp to QString's replace() function to replace the matched text with new text.

    QString str = "One Eric another Eirik, and an Ericsson. "
                  "How many Eiriks, Eric?";
    QRegExp rx("\\b(Eric|Eirik)\\b"); // match Eric or Eirik
    int pos = 0;    // where we are in the string
    int count = 0;  // how many Eric and Eirik's we've counted
    while (pos >= 0) {
        pos = rx.indexIn(str, pos);
        if (pos >= 0) {
            ++pos;      // move along in str
            ++count;    // count our Eric or Eirik
        }
    }

We've used the indexIn() function to repeatedly match the regexp in the string. Note that instead of moving forward by one character at a time pos++ we could have written pos += rx.matchedLength() to skip over the already matched string. The count will equal 3, matching 'One Eric another Eirik, and an Ericsson. How many Eiriks, Eric?'; it doesn't match 'Ericsson' or 'Eiriks' because they are not bounded by non-word boundaries.

One common use of regexps is to split lines of delimited data into their component fields.

    str = "Trolltech AS\twww.trolltech.com\tNorway";
    QString company, web, country;
    rx.setPattern("^([^\t]+)\t([^\t]+)\t([^\t]+)$");
    if (rx.indexIn(str) != -1) {
        company = rx.cap(1);
        web = rx.cap(2);
        country = rx.cap(3);
    }

In this example our input lines have the format company name, web address and country. Unfortunately the regexp is rather long and not very versatile -- the code will break if we add any more fields. A simpler and better solution is to look for the separator, '\t' in this case, and take the surrounding text. The QString::split() function can take a separator string or regexp as an argument and split a string accordingly.

    QStringList field = str.split("\t");

Here field[0] is the company, field[1] the web address and so on.

To imitate the matching of a shell we can use wildcard mode.

    QRegExp rx("*.html");
    rx.setPatternSyntax(QRegExp::Wildcard);
    rx.exactMatch("index.html");                // returns true
    rx.exactMatch("default.htm");               // returns false
    rx.exactMatch("readme.txt");                // returns false

Wildcard matching can be convenient because of its simplicity, but any wildcard regexp can be defined using full regexps, e.g. .*.html$. Notice that we can't match both .html and .htm files with a wildcard unless we use *.htm* which will also match 'test.html.bak'. A full regexp gives us the precision we need, .*\.html?$.

QRegExp can match case insensitively using setCaseSensitivity(), and can use non-greedy matching, see setMinimal(). By default QRegExp uses full regexps but this can be changed with setWildcard(). Searching can be forward with indexIn() or backward with lastIndexIn(). Captured text can be accessed using capturedTexts() which returns a string list of all captured strings, or using cap() which returns the captured string for the given index. The pos() function takes a match index and returns the position in the string where the match was made (or -1 if there was no match).

See also QString, QStringList, QRegExpValidator, and QSortFilterProxyModel.

Member Type Documentation

enum QRegExp::CaretMode

The CaretMode enum defines the different meanings of the caret (^) in a regular expression. The possible values are:

enum QRegExp::PatternSyntax

The syntax used to interpret the meaning of the pattern.

See also setPatternSyntax().

Member Function Documentation

QRegExp::QRegExp ()

Constructs an empty regexp.

See also isValid() and errorString().

QRegExp::QRegExp ( const QString & pattern, Qt::CaseSensitivity cs = Qt::CaseSensitive, PatternSyntax syntax = RegExp )

Constructs a regular expression object for the given pattern string. The pattern must be given using wildcard notation if syntax is Wildcard; the default is RegExp. The pattern is case sensitive, unless cs is Qt::CaseInsensitive. Matching is greedy (maximal), but can be changed by calling setMinimal().

See also setPattern(), setCaseSensitivity(), and setPatternSyntax().

QRegExp::QRegExp ( const QRegExp & rx )

Constructs a regular expression as a copy of rx.

See also operator=().

QRegExp::~QRegExp ()

Destroys the regular expression and cleans up its internal data.

QString QRegExp::cap ( int nth = 0 )

Returns the text captured by the nth subexpression. The entire match has index 0 and the parenthesized subexpressions have indexes starting from 1 (excluding non-capturing parentheses).

    QRegExp rxlen("(\\d+)(?:\\s*)(cm|inch)");
    int pos = rxlen.indexIn("Length: 189cm");
    if (pos > -1) {
        QString value = rxlen.cap(1); // "189"
        QString unit = rxlen.cap(2);  // "cm"
        // ...
    }

The order of elements matched by cap() is as follows. The first element, cap(0), is the entire matching string. Each subsequent element corresponds to the next capturing open left parentheses. Thus cap(1) is the text of the first capturing parentheses, cap(2) is the text of the second, and so on.

See also capturedTexts() and pos().

QStringList QRegExp::capturedTexts ()

Returns a list of the captured text strings.

The first string in the list is the entire matched string. Each subsequent list element contains a string that matched a (capturing) subexpression of the regexp.

For example:

    QRegExp rx("(\\d+)(\\s*)(cm|inch(es)?)");
    int pos = rx.indexIn("Length: 36 inches");
    QStringList list = rx.capturedTexts();
    // list is now ("36 inches", "36", " ", "inches", "es")

The above example also captures elements that may be present but which we have no interest in. This problem can be solved by using non-capturing parentheses:

    QRegExp rx("(\\d+)(?:\\s*)(cm|inch(?:es)?)");
    int pos = rx.indexIn("Length: 36 inches");
    QStringList list = rx.capturedTexts();
    // list is now ("36 inches", "36", "inches")

Note that if you want to iterate over the list, you should iterate over a copy, e.g.

    QStringList list = rx.capturedTexts();
    QStringList::Iterator it = list.begin();
    while(it != list.end()) {
        myProcessing(*it);
        ++it;
    }

Some regexps can match an indeterminate number of times. For example if the input string is "Offsets: 12 14 99 231 7" and the regexp, rx, is (\d+)+, we would hope to get a list of all the numbers matched. However, after calling rx.indexIn(str), capturedTexts() will return the list ("12", "12"), i.e. the entire match was "12" and the first subexpression matched was "12". The correct approach is to use cap() in a loop.

The order of elements in the string list is as follows. The first element is the entire matching string. Each subsequent element corresponds to the next capturing open left parentheses. Thus capturedTexts()[1] is the text of the first capturing parentheses, capturedTexts()[2] is the text of the second and so on (corresponding to $1, $2, etc., in some other regexp languages).

See also cap() and pos().

Qt::CaseSensitivity QRegExp::caseSensitivity () const

Returns Qt::CaseSensitive if the regexp is matched case sensitively; otherwise returns Qt::CaseInsensitive.

See also setCaseSensitivity(), patternSyntax(), pattern(), and isMinimal().

QString QRegExp::errorString ()

Returns a text string that explains why a regexp pattern is invalid the case being; otherwise returns "no error occurred".

See also isValid().

QString QRegExp::escape ( const QString & str )   [static]

Returns the string str with every regexp special character escaped with a backslash. The special characters are $, (,), *, +, ., ?, [, ,], ^, {, | and }.

Example:

    s1 = QRegExp::escape("bingo");   // s1 == "bingo"
    s2 = QRegExp::escape("f(x)");    // s2 == "f\\(x\\)"

This function is useful to construct regexp patterns dynamically:

    QRegExp rx("(" + QRegExp::escape(name) +
               "|" + QRegExp::escape(alias) + ")");

See also setPatternSyntax().

bool QRegExp::exactMatch ( const QString & str ) const

Returns true if str is matched exactly by this regular expression; otherwise returns false. You can determine how much of the string was matched by calling matchedLength().

For a given regexp string R, exactMatch("R") is the equivalent of indexIn("^R$") since exactMatch() effectively encloses the regexp in the start of string and end of string anchors, except that it sets matchedLength() differently.

For example, if the regular expression is blue, then exactMatch() returns true only for input blue. For inputs bluebell, blutak and lightblue, exactMatch() returns false and matchedLength() will return 4, 3 and 0 respectively.

Although const, this function sets matchedLength(), capturedTexts(), and pos().

See also indexIn() and lastIndexIn().

int QRegExp::indexIn ( const QString & str, int offset = 0, CaretMode caretMode = CaretAtZero ) const

Attempts to find a match in str from position offset (0 by default). If offset is -1, the search starts at the last character; if -2, at the next to last character; etc.

Returns the position of the first match, or -1 if there was no match.

The caretMode parameter can be used to instruct whether ^ should match at index 0 or at offset.

You might prefer to use QString::find(), QString::contains(), or even QStringList::grep(). To replace matches use QString::replace().

Example:

    QString str = "offsets: 1.23 .50 71.00 6.00";
    QRegExp rx("\\d*\\.\\d+");    // primitive floating point matching
    int count = 0;
    int pos = 0;
    while ((pos = rx.indexIn(str, pos)) != -1) {
        ++count;
        pos += rx.matchedLength();
    }
    // pos will be 9, 14, 18 and finally 24; count will end up as 4

Although const, this function sets matchedLength(), capturedTexts() and pos().

If the QRegExp is a wildcard expression (see setPatternSyntax()) and want to test a string against the whole wildcard expression, use exactMatch() instead of this function.

See also lastIndexIn() and exactMatch().

bool QRegExp::isEmpty () const

Returns true if the pattern string is empty; otherwise returns false.

If you call exactMatch() with an empty pattern on an empty string it will return true; otherwise it returns false since it operates over the whole string. If you call indexIn() with an empty pattern on any string it will return the start offset (0 by default) because the empty pattern matches the 'emptiness' at the start of the string. In this case the length of the match returned by matchedLength() will be 0.

See QString::isEmpty().

bool QRegExp::isMinimal () const

Returns true if minimal (non-greedy) matching is enabled; otherwise returns false.

See also caseSensitivity().

bool QRegExp::isValid () const

Returns true if the regular expression is valid; otherwise returns false. An invalid regular expression never matches.

The pattern [a-z is an example of an invalid pattern, since it lacks a closing square bracket.

Note that the validity of a regexp may also depend on the setting of the wildcard flag, for example *.html is a valid wildcard regexp but an invalid full regexp.

See also errorString().

int QRegExp::lastIndexIn ( const QString & str, int offset = -1, CaretMode caretMode = CaretAtZero ) const

Attempts to find a match backwards in str from position offset. If offset is -1 (the default), the search starts at the last character; if -2, at the next to last character; etc.

Returns the position of the first match, or -1 if there was no match.

The caretMode parameter can be used to instruct whether ^ should match at index 0 or at offset.

Although const, this function sets matchedLength(), capturedTexts() and pos().

Warning: Searching backwards is much slower than searching forwards.

See also indexIn() and exactMatch().

int QRegExp::matchedLength () const

Returns the length of the last matched string, or -1 if there was no match.

See also exactMatch(), indexIn(), and lastIndexIn().

int QRegExp::numCaptures () const

Returns the number of captures contained in the regular expression.

QString QRegExp::pattern () const

Returns the pattern string of the regular expression. The pattern has either regular expression syntax or wildcard syntax, depending on patternSyntax().

See also setPattern(), patternSyntax(), and caseSensitivity().

PatternSyntax QRegExp::patternSyntax () const

Returns Wildcard if wildcard mode is enabled; otherwise returns RegExp. The default is RegExp.

See also setPatternSyntax(), pattern(), and caseSensitivity().

int QRegExp::pos ( int nth = 0 )

Returns the position of the nth captured text in the searched string. If nth is 0 (the default), pos() returns the position of the whole match.

Example:

    QRegExp rx("/([a-z]+)/([a-z]+)");
    rx.indexIn("Output /dev/null");   // returns 7 (position of /dev/null)
    rx.pos(0);                        // returns 7 (position of /dev/null)
    rx.pos(1);                        // returns 8 (position of dev)
    rx.pos(2);                        // returns 12 (position of null)

For zero-length matches, pos() always returns -1. (For example, if cap(4) would return an empty string, pos(4) returns -1.) This is a feature of the implementation.

See also cap() and capturedTexts().

void QRegExp::setCaseSensitivity ( Qt::CaseSensitivity cs )

Sets case sensitive matching to cs.

If cs is Qt::CaseSensitive, \.txt$ matches readme.txt but not README.TXT.

See also caseSensitivity(), setPatternSyntax(), setPattern(), and setMinimal().

void QRegExp::setMinimal ( bool minimal )

Enables or disables minimal matching. If minimal is false, matching is greedy (maximal) which is the default.

For example, suppose we have the input string "We must be <b>bold</b>, very <b>bold</b>!" and the pattern <b>.*</b>. With the default greedy (maximal) matching, the match is "We must be <b>bold</b>, very <b>bold</b>!". But with minimal (non-greedy) matching, the first match is: "We must be <b>bold</b>, very <b>bold</b>!" and the second match is "We must be <b>bold</b>, very <b>bold</b>!". In practice we might use the pattern <b>[^<]*</b> instead, although this will still fail for nested tags.

See also minimal() and setCaseSensitivity().

void QRegExp::setPattern ( const QString & pattern )

Sets the pattern string to pattern. The case sensitivity, wildcard and minimal matching options are not changed.

See also pattern(), setPatternSyntax(), and setCaseSensitivity().

void QRegExp::setPatternSyntax ( PatternSyntax syntax )

Sets the wildcard mode for the regular expression. The default is QRegExp::RegExp.

Setting syntax to QRegExp::Wildcard enables simple shell-like wildcard matching. For example, r*.txt matches the string readme.txt in wildcard mode, but does not match readme.

Setting syntax to QRegExp::FixedString means that the pattern is interpreted as a plain string. Special characters (e.g., backslash) don't need to be escaped then.

See also patternSyntax(), setPattern(), setCaseSensitivity(), and escape().

bool QRegExp::operator!= ( const QRegExp & rx ) const

Returns true if this regular expression is not equal to rx; otherwise returns false.

See also operator==().

QRegExp & QRegExp::operator= ( const QRegExp & rx )

Copies the regular expression rx and returns a reference to the copy. The case sensitivity, wildcard, and minimal matching options are also copied.

bool QRegExp::operator== ( const QRegExp & rx ) const

Returns true if this regular expression is equal to rx; otherwise returns false.

Two QRegExp objects are equal if they have the same pattern strings and the same settings for case sensitivity, wildcard and minimal matching.

Related Non-Members

QDataStream & operator<< ( QDataStream & out, const QRegExp & regExp )

This is an overloaded member function, provided for convenience.

Writes the regular expression regExp to stream out.

See also Format of the QDataStream Operators.

QDataStream & operator>> ( QDataStream & in, QRegExp & regExp )

This is an overloaded member function, provided for convenience.

Reads a regular expression from stream in into regExp.

See also Format of the QDataStream Operators.